Lamellar cylinder FF (Foil Fabfic coated)
Lamellar cylinder FF (Foil Fabfic coated)
Share this
Share this
Cylinder lamellar mineral wool heat-insulating IZOTERM® FF - a heat-insulating material (heat-insulating structure), ready for use, which is formed from strips (lamellas) of stone wool, rotated 90 ° and glued to the foil fabric. Lamels due to the directivity of the fibers have increased compressive strength and are less deformed during installation, unlike ordinary mats. Cylinders are made for a given diameter of the insulated surface, and have a longitudinal overlap of foil fabric with an adhesive base. Equipped with shaped products: bends, tees and transitions.
Widely used in industrial and civil engineering for heat and sound insulation of pipelines, ducts and technical equipment with a diameter of more than 219 mm, for indoor applications where a more durable coating, resistant to mechanical stress, is required. The aluminum foil coating is an effective vapor barrier, protects against the formation of condensation, and also gives the design an aesthetic appearance.
|
Parameter name |
Units measuring |
Lamellar cylinder IZOTERM RW-35 FF |
Lamellar cylinder IZOTERM RW-50 FF |
|
Compressibility |
%, up to |
15 |
8 |
|
Density |
kg/m3 |
from 30-40 incl. |
From 41-55 incl. |
|
Thermal conductivity λ10 |
W/mK |
0,038 |
0,036 |
|
λ25 |
0,039 |
0,037 |
|
|
λ125 |
0,061 |
0,61 |
|
|
Mass humidity |
%, up to |
0,5 |
0,5 |
|
Organic matter content * |
%, up to |
2,5 |
2,5 |
|
Water absorption |
kg/m2, up to |
1,0 |
1,0 |
|
Flammability group |
Group |
G1 |
G1 |
|
Operating temperature |
°С |
to 250 |
to 300 |
|
Parameter name |
Units measuring |
Value |
|
Length |
mm |
2 000-12 000 |
|
Width |
mm |
1000 |
|
Thickness (10 mm pitch) |
mm |
20-120 inclusive * |
Back to products